General Archives - Page 2 of 3

17 Nov How to reduce errors in your manufacturing process with Automatic Mark Positioning

Posted at 03:33h in Aerospace and Defense, Automotive, Consumer Products, Foodpack, General, Medical and Pharma, Munitions, Semiconductors and Electronics

Jump To: The Problem and Solution The Problem and Solution All production facilities are concerned with reducing manufacturing issues resulting from human errors and quality. Reducing errors is a very high priority. Manufacturers can prevent errors by adding traditional quality control stations to production lines. But a...

30 Sep Deep Marking in Heavy Metal // Railway Industry

Posted at 16:36h in General

Jump To: Marking Solutions for the Transportation Industry Marking Solutions for the Transportation Industry In the last few years, we have started to look differently at transport, bearing in mind the environmental issues we face. More people ride bikes instead of drive cars for short trips. Additionally,...

10 Sep The best way to label PPE with graphics, text, and regulatory information is by using lasers

Posted at 20:46h in Aerospace and Defense, Automotive, Consumer Products, Foodpack, General, Medical and Pharma, Semiconductors and Electronics

Jump To: Creating Permanent Labeling on PPE Creating Permanent Labeling on PPE Learn how to use laser marking systems to comply with regulations, apply text and graphics, and add legal information and instructions to PPE. The category of personal protective equipment is omnipresent. People use PPE in the...

30 Jun Adding Cameras to Manufacturing Production Lines—Laser Marking and Dot Peen Systems

Posted at 14:30h in General

Cameras In The Manufacturing World Cameras have become omnipresent in our world—even in manufacturing. We use cameras in production environments to increase productivity, as well as the quality of the product. Grading, quality control, and part placement are just some of the applications for cameras. Overall,...

24 Jun The Best Software for Laser Marking Systems // Merlin® II LS

Posted at 16:24h in General

More About Laser Marking System Software Laser marking systems are valuable tools for marking parts with human-readable text or 2D data matrix codes. Many manufacturers and industries use light to produce high contrast marks today. Often, marking is only part of the process in an assembly...

17 Jun How to Mark a Curved, Cylindrical, or Multiple-Plane Part with a Laser

Posted at 14:49h in General

To produce top quality permanent marks, laser marking systems must be focused on a specific point. If your part is flat, then marking will be easy. If your part has a curve, angle, or multiple planes, however, you will need to change the focus of...

07 Jun Prevent Product Counterfeiting and Tampering of Plastic Parts

Posted at 14:53h in General

To prevent tampering with your plastic components and reduce the risk of counterfeiting, use permanent marking solutions. Marking plastic for traceability can: Protect intellectual property for components in electronic devices. Promote patient safety in medical devices. Ensure product cleanliness and authenticity in personal care products. Verify the integrity...

07 May What Type of Dot Peen Controller Do You Need?

Posted at 15:53h in Aerospace and Defense, Automotive, Consumer Products, Foodpack, General, Medical and Pharma

Jump To: You Get What You Pay For It Depends What You Are Going to Mark and Who the Operator Is Employing the Latest Technology is Your Best Bet Most dot peen markers can be controlled two ways: a controller or a computer. The former is an...

15 Apr A Unique Product: What is a “Green” Laser?

Posted at 15:20h in Aerospace and Defense, Automotive, Consumer Products, Foodpack, General, Medical and Pharma, Semiconductors and Electronics

Jump To: What is a Green Laser? The Green Laser is Unique Applications for using a Green Laser What is a Green Laser? Creating permanent traceability marks is critical for many manufacturers. Sometimes, very delicate materials require the use of non-traditional methods and equipment to achieve this...

25 Mar Do you need a laser enclosure?

Posted at 19:58h in General

ARE LASER MARKERS SAFE? A manufacturer must always be aware of safety. Lasers can be designed and built to be very safe. A laser beam by itself would have a classification that is created by evaluating the power, wavelength and other factors that can cause harm...

General

17 Nov How to reduce errors in your manufacturing process with Automatic Mark Positioning

30 Sep Deep Marking in Heavy Metal // Railway Industry

10 Sep The best way to label PPE with graphics, text, and regulatory information is by using lasers

30 Jun Adding Cameras to Manufacturing Production Lines—Laser Marking and Dot Peen Systems

24 Jun The Best Software for Laser Marking Systems // Merlin® II LS

17 Jun How to Mark a Curved, Cylindrical, or Multiple-Plane Part with a Laser

07 Jun Prevent Product Counterfeiting and Tampering of Plastic Parts

07 May What Type of Dot Peen Controller Do You Need?

15 Apr A Unique Product: What is a “Green” Laser?

25 Mar Do you need a laser enclosure?

Sign-up For Our Newsletter

About Telesis

How Can We Help?

Product Info

Find Your Mark